Rubbermaid desiccant box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant boxes contoured to fit the bottom of Rubbermaid 21 cup storage containers.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 258
- Wydruki
- 2
- Wyświetlenia
- 1534
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Desiccant boxes contoured to fit the bottom of Rubbermaid 21 cup storage containers.
This was designed for the translucent containers containers work. However, I was able to confirm it also fits Zylar containers if you can still find them.
Two boxes fill the bottom of the container and sit flat with only a little gap in the long direction. I would recommend using PETG or ABS for a little more heat resistance in the dehydrator.
Each box holds approximately 60 grams of 2-4mm diameter silica gel desiccant. Box tops should be secured with an M3 x 8mm screw and nut.
Updated 2022-12-29: Added variants with solid top/bottom/sides.
Print Settings
Printer: Prusa I3 MK3S
Resolution: 0.15
Infill: 15% gyroid
Filament: eSun PETG Natural
Notes:
I originally intended to use supports for the M3 nut socket and you'll see them in the MK2S PLA prints. However, I forgot to enable them for the MK3S PETG prints. It turned out fine anyway(if a little messy) anyway.