Rubbermaid desiccant box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desiccant boxes contoured to fit the bottom of Rubbermaid 21 cup storage containers.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 258
- Makes
- 2
- Views
- 1,534
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Desiccant boxes contoured to fit the bottom of Rubbermaid 21 cup storage containers.
This was designed for the translucent containers containers work. However, I was able to confirm it also fits Zylar containers if you can still find them.
Two boxes fill the bottom of the container and sit flat with only a little gap in the long direction. I would recommend using PETG or ABS for a little more heat resistance in the dehydrator.
Each box holds approximately 60 grams of 2-4mm diameter silica gel desiccant. Box tops should be secured with an M3 x 8mm screw and nut.
Updated 2022-12-29: Added variants with solid top/bottom/sides.
Print Settings
Printer: Prusa I3 MK3S
Resolution: 0.15
Infill: 15% gyroid
Filament: eSun PETG Natural
Notes:
I originally intended to use supports for the M3 nut socket and you'll see them in the MK2S PLA prints. However, I forgot to enable them for the MK3S PETG prints. It turned out fine anyway(if a little messy) anyway.