TomTom Ball joint repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rubber part of TomTom holder ball joint. It is just a hollow sphere. Experiment with size for a good fit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Rubber part of TomTom holder ball joint failed. It is just a hollow sphere. With a bit of trial and error printed the right size from TPE/TPU. TomTom won't fall out anymore and can be positioned again.
Print with the open side down in a (semi) flexible filament of your choosing. Maybe size needs a bit of tweaking for a good friction fit. On my printer, 12p5_16.stl has the right sizes. Yours might vary. I uploaded a few other size STL's and the source .scad.
See pictures. Just remove the worn rubber part and press-fit the new TPU part in place, then re-assemble. Screws should not be overly tight.
Print Settings
Printer:
Mendel90
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
TPE/TPU or anything sufficiently flexible