TomTom Ball joint repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubber part of TomTom holder ball joint. It is just a hollow sphere. Experiment with size for a good fit.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Rubber part of TomTom holder ball joint failed. It is just a hollow sphere. With a bit of trial and error printed the right size from TPE/TPU. TomTom won't fall out anymore and can be positioned again.
Print with the open side down in a (semi) flexible filament of your choosing. Maybe size needs a bit of tweaking for a good friction fit. On my printer, 12p5_16.stl has the right sizes. Yours might vary. I uploaded a few other size STL's and the source .scad.
See pictures. Just remove the worn rubber part and press-fit the new TPU part in place, then re-assemble. Screws should not be overly tight.
Print Settings
Printer:
Mendel90
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
TPE/TPU or anything sufficiently flexible