K1 Tool Caddy Betweener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1 Tool Caddy Betweener for the right or left side of the printer with JC's existing riser setup.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a combination of an existing remix tool holder for the Ender series on Thingiverse and JC's Riser system for the K1.
Added the proper supports/angles to ensure a snug fit, then tacked on a modded version of a Thingiverse remix by PannedPanda https://www.thingiverse.com/thing:4842195
I was worried about the tools possibly scratching the side of the printer, so I added an optional guard. Used (2) M3x14mm screws, (4) M3 washers, and (2) M3 nuts to attach guard to body.
Printing and post-processing isn't the greatest, but it cleans up pretty nicely, since the supports are in the recesses.
I printed in the same config as the stls, hex holes on the build plate for both the Body and Guard, with Zig-Zag support and Digital Blue Overture PLA Pro.