Miata teeth / fang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NB2 Miata teeth that doesn't require any additional hardware or adhesive
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 666
- Wydruki
- 5
- Wyświetlenia
- 3278
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple Miata teeth that doesn't require any additional hardware or adhesive. Slide it right in place and use the stock bumper attachment to secure it. (see pic. 2)
Print in one solid piece without any supports.
The only post processing you will need to do is using some heat (I used a lighter) to heat up the elbow brackets and slightly bend them, that way they can slide right under the bumper. (see pic. 3)
(model designed and tested on my MX5 MK2.5, don't know if it fits other model)
Edit : As reported in the comments, the model is specific to the NB2. Check the remix section to find a model that match you generation of miata