Drilling Bounding Ring / Drill Stop using M3 screws and heat inserts made with OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric drill stop remixed for use with M3 screws and heat inserts
- Ocena
- 4,833 / 5
- Polubienia
- 40
- Pobrania
- 281
- Wydruki
- 6
- Wyświetlenia
- 1003
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a remix of a drill stop to limit the drill depth.
The prebuild stl-files are for drills with diameters from 2 to 14mm, but you can customize this easily for your needs with OpenSCAD, the file is also attached. You will need the great BOSL2 - library for OpenSCAD (https://github.com/BelfrySCAD/BOSL2).
You will also need 3mm screws (i used flathead screws) and heat inserts (i used ruthex RX-M3x5.7)
The customizer allows to change the tool height, the drill diameter, with or without printed diameter, clearance of drill diameter and screw holes