Drilling Bounding Ring / Drill Stop using M3 screws and heat inserts made with OpenSCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A parametric drill stop remixed for use with M3 screws and heat inserts
- Rating
- 4.833 / 5
- Likes
- 40
- Downloads
- 281
- Makes
- 6
- Views
- 1,003
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Just a remix of a drill stop to limit the drill depth.
The prebuild stl-files are for drills with diameters from 2 to 14mm, but you can customize this easily for your needs with OpenSCAD, the file is also attached. You will need the great BOSL2 - library for OpenSCAD (https://github.com/BelfrySCAD/BOSL2).
You will also need 3mm screws (i used flathead screws) and heat inserts (i used ruthex RX-M3x5.7)
The customizer allows to change the tool height, the drill diameter, with or without printed diameter, clearance of drill diameter and screw holes