1 / 2
Holder/stand for RioRand RR-PWM-15V Motor Speed Controller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple PCB stand for the RioRand RR-PWM-15V motor speed controller. Features support columns with an M3 thread.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple stand/holder for the RioRand RR-PWM-15V Motor Speed Controller. It features support columns with an M3 thread.
The bottom is labelled.
Note that in the initial version shown in the photos, the columns were too short – I later fixed this in the STL but did not re-print it.