Economic Roller Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the design of the "Roller Spool Holder" but needed to print a few of them and was short on filament, so I…
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 210
- Wydruki
- 2
- Wyświetlenia
- 1142
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I liked the design of the "Roller Spool Holder" but needed to print a few of them and was short on filament, so I decided to remake one compatible with the end-caps and PVC tube used, but only about 60% of filament required (made everything thinner and literally cut some corners).
The holes in case it was to be screwed down are 4mm in diameter so you can use m3,m4 or 1/8 although I dont think I will be mounting them anywhere.
Print instructions
Easy print, no supports required (the picture I believe was made in draft 0.3 mm)