Solder Fume Extractor (92mm fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this fume extractor because I had a handful of 92mm fans in my shop. There is a cut-to-fit carbon filter…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 460
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this fume extractor because I had a handful of 92mm fans in my shop. There is a cut-to-fit carbon filter sandwiched between two grills.
To build this, you must print:
1x Base
3x Grill
1x Spacer (there are 4 in the .stl) or 1x Spacers-With-Gasket
I've included the Fusion 360 file for your enjoyment.
EDIT 10/26/17 Added a new version of the spacer that seals up the filter area for better suction through the front, at least theoretically.
Print Settings
Printer:
JG Aurora A3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: Electronics