Cloaked Bunny, hidden under coat with a wavy shaped hull. Creepy but nice halloween figures.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bunny figures, hidden under a cloak blanket. Cloak is generated over any existing 3D object by this OpenScad procedure.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 95
- Wydruki
- 5
- Wyświetlenia
- 542
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Different bunny / rabbit figures, hidden under a cloak blanket.
The cloak is generated over any existing 3D object by special OpenScad procedure. This scans the target object, stepwise spiralling up (Z slice by slice), using the “intersection” command to create hulls for each slice. These hulls are then modulated with a sine function to achieve a nice wavy shape.
All major setting are parametric variables in OpenScad and can be adapted to other target objects as well.
The projects consists of 2 OpenCad source .SCAD files:
- 1st file is the “target object” which is later hidden under the cloak (here: halobunny.scad)
- 2nd file contains the “cloak" algorithm which loads the target, scans it and creates the cloak
(here: cloaking_bunny.scad). Freely adapt this by yourself to cloak other objects…
Remark: Be aware of a very high rendering time (hours!) for the cloaking if Z slices with 1mm or less thickness are used.