Liczymy pasujące modele…
Rc boat propeller and hull design : Propeller: I designed this 4cm propeller for my rc boat made in fusion. First, i make the circle of 40mm,10mm then i extrude the 10mm circle and add cylinder and added loft around them. Then after make…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena jednego wariantu
A simple tugboat model styled to look like a toy. It can float as long as the model is printed to be light and looks great!
Wydruk około 13,47 €–16,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wer hier nach Hull Zelle sucht, sollte auch wissen wie sie anzuwenden ist. Typisch für sauer Kupfer: Messing Blech als Kathode, AnCu Anode, 1 A - 10 Minuten Anyone looking for Hull cells here should also know how to use them. Typical for…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The badge case by @dynom took 3hr to print on my Prusa MK4, so I designed a flatter one that I can print quicker to get more cases to more people. Built for speed not for comfort. You may be interested in my protected 18500 battery adapters
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Here's a desiccant holder that fits in any 12ga with 2.75 chamber. Good for long term storage. My friend thought of the idea and here is the end result! Don't put a bottom or top layer and the case head end and the opposing end of hull…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This hull works with all the parts of this model: https://www.printables.com/model/51680-3d-printed-rc-jet-boat/comments/897854 https://youtu.be/-7sSGXb9A3U?si=2WvybAz3n-ELLGuw jet housing is included in this model. The deck has to be…
Use this sd card hull if your sd card has physical damage and is unreadable or not recognized by the pc. A while back the plastic hull of my sd card broke and it was no longer recognized by the pc. Using this model I was able to put the…
An original 100% custom-designed RC Cabin Cruiser hull optimized specifically for FDM 3D printing and easy RC hardware integration. This model features a modular architecture that breaks down into individual components, eliminating the…
This was supposed to be a LNG carrier, but I dont have time to finish it. Feel free to do whatever you want with it. There are 2 types of the same hull : One with holes - made to sink. One wih no holes (except the screw and wood screw…
This is an rough model of the cb90. You can make an RC model out of it. You can cut it into parts and use it as a rc boat hull. Category: Models
Larger Scale Napoleonic War Era Ship Blanks for model building and gaming. 9 different varieties of ships. The “Bowsprit” or forward mas at the bow tends to get a little munchy, but no supports were used on the test samples (except a…
Model of a Laser 2 Sailboat hull with separate centerboard and rudder that slot in.
This model is compatible with the lego system.
This model is based dimensionally on the Exotic Ammo machined aluminum hulls. It is meant to be more or less disposable. This is meant for those with knowledge of loading/reloading such rounds, though it can also be used as a prop for…
This model is compatible with the lego system.
Das ist ein Modell der alten Schule "Ahl Schull" in Heddesdorf (Stadtteil von Neuwied) im Format H0 (1:87). Ich bin auf der Suche nach 3D-Modellen von Fachwerkhäusern auf die Papierschnittbögen von Jürgen Moritz auf der Seite…
Due to the size I had some warping on the corners. I split the fuselage parts and glued them afterwards.
Chull are basically big rocky crabs that can be trained tp pull wagons. This will need supports, physical ones and maybe emotional ones too. If you're on an fdm printer like in the picture you'll want to be careful when removing supports…
(V.2 will soon be available, as soon as I have made a testprint...) This is the first build I publish. I dont think I will change anything but you never know. The superstructure is intended to be built with wood... only the hull will be…
This is a simple battleship (self-designated Endeavor-class), based loosely on the pre-dreadnought battleship Mikasa and other battleships of that era ( https://en.wikipedia.org/wiki/Pre-dreadnought_battleship ). This model is relatively…
1/350 Military Model German Embed Light Cruise full hull model, if you want to print this model, I recommend to print on
There is an revised Hull part 9, it now has mounts for the motors. I also provided an addon if you already have the part printed. Gears and belt are also provided... the belt must be printed in TPU. The main reason I made an updated hull…
Test hull number 1. You can use it for tests, models or dioramas. You can split it into multiple parts and scale it with slicing software. Don't forget to share your makes and check out my other designs too. Print it with 0.2mm layer…
This is a model of a Hallberg Rassy 69 designed by Germán Frers. I designed this model to be 3d printed in a 1/40 scale.
This is a printable 3d boat hull model
KV hull with tracks as separate pieces. Useful if you want to print them in a different colour from the main body. Print flat (not as it is shown), remove any support (this is tricky, the tracks are fragile. Use a small pair of snips.),…
Test hull number 5. You can use it for tests, models or dioramas. You can split it into multiple parts and scale it with slicing software. Don't forget to share your makes and check out my other designs too. Print it with 0.2mm layer…
Warning! These are SUPER TINY. I was able to print all four ship hulls in 22 minutes. There is another file with larger models and a larger variety, but you can also just scale these up as well. Up to you. Detail at this scale is pretty…
Different bunny / rabbit figures, hidden under a cloak blanket. The cloak is generated over any existing 3D object by special OpenScad procedure. This scans the target object, stepwise spiralling up (Z slice by slice), using the…
For all the people out there struggling with the fact that GM does not include just enough pieces to get two tanks out of one box. This model is compatible with the current edition of the Leman Russ, and the part is one to one scale of…
This Benchy doesn’t float—it lurks . Inspired by Jules Verne’s 20,000 Leagues Under the Sea , it’s a desktop-sized tribute to Victorian ambition, mechanical elegance, and deep-sea vengeance. The hull is plated like a leviathan, the…
12 gauge shotgun hull reamer + o ring grove
Voyager -Intrepid Class Star Ship Remixed secondary hull to accommodate for an optional open Shuttle bay. Check out Martin's original model. Great Design & ingenuity. Original model is absolute quality, & now with the optional open…
this for a large boat and dose require a larger print bed but can be sized down you must print 2 of them and connect them you do need to use glue to put them together i recommend using a PLA glue to make sure they don't come apart
V-Hull boat i have printed it but i did not take a picture before i made some mods to it
Creation of HDS (not mine) Boat VIIC uboot, following Vom Original zum Modell, Uboottyp VII C de Fritz Köhl, Axel Niestlé. https://forum.freecadweb.org/viewtopic.php?t=27269 .STEP (edit files) added. Category: R/C Vehicles
Beowulf Extended hull (28mm 2ndDynasty Kitbash) Kitbashed pieces for the 2ndDynasty Beowulf 28mm 3D Printable Scifi Spaceship from Traveller done by ShadowLiger from the 2ndDynasty Discord. Extends hull length in 3 tile and 4 tile…
NOTE - a 1:30 scale model of this vessel can be found HERE Please NOTE , building a full sized boat from a model is NOT allowed for a certified Class Globe 580 This model is NOT in strict conformity with the original 580 Plans and is…
I did not have any transparent filament, so would work better that the one in the photo, so I would suggest you print in white or transparent filament. I also did not have enough LEDs at the moment to test, but i think you could have fun…
Test hull number 3. You can use it for tests, models or dioramas. You can split it into multiple parts and scale it with slicing software. Don't forget to share your makes and check out my other designs too. Print it with 0.2mm layer…
Printed with Prusa PC Blend polycarbonate, with the default 0,2 profile and the recommended settings in Prusa Slicer for the filament. On a smooth hotbed base and using glue stick to make it easier to remove it from the printing base.…
I needed something to make the boat a little nicer than just a plain deck so there is the windshield for that cruiser vibe. Original project: https://www.printables.com/model/496157-jetboat-hull-new-design It is slightly tapered for…
Test hull number 2. You can use it for tests, models or dioramas. You can split it into multiple parts and scale it with slicing software. Don't forget to share your makes and check out my other designs too. Print it with 0.2mm layer…
If you mistreated your TV Remote, it may be broken like mine. Use this print to hold it together and protect it on future drops. Printed with elastic filament: extrudr® FLEX MEDIUM A98.
A generic, robust boat hull compatible with standard toy bricks. Low-poly design leaves plenty of room on the inside and more space for the imagination (Pirate ship? Space ship? Pirate space ship? It can be anything). A grown-up audience…
This is a simple 3D printable model of a late 19th century naval monitor warship, based (very) loosely on the Arkansas-class monitors of the US Navy (See https://en.wikipedia.org/wiki/Arkansas-class_monitor ). Self-designated…
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
WIP. I'll hopefully add the decks and modify it to be RC,
Fan for ventilate DF65 hull after sailing. 4020 turbo fan 5v, USB powered. You can print it in two parts without supports and glue them together. Or just print in one and use some supports…
Ikea's SOLBO owl nightlight is a really nicely made light for kids rooms. However, the usual critique is the far too bright light. Ikea used an unusual 24V LED lamp with a custom connector. So just changing the LED didn't work easily. So,…
awesome triple hull sail boat
🛥 Boat Hull n.6 – 3D Printable Yacht Hull This modern boat hull is ideal for experimentation, model building, or diorama creation. You can also modify and adapt it for RC use , adding your own propulsion system and deck details. 📏 Model…
I am developing an Australian Defence Force in the future. The first is a modular armoured vehicle. Starting with the Hull pack with three options - Hover, Tracked and Wheeled All future will be modules that will fit onto these hulls.…
A battered and timeworn wooden rowboat hull, perfect for bringing coastal, riverbank, or dockside scenes to life. The warped planks, exposed ribs, and worn interior seating evoke years of hard travel across rough waters before finally…
Combine it with "Mini Multihull" and "Rigid Sail"/"Simple Rig" Use PU glue, skewers/spokes, zip ties, etc... Submarine-Turret: remixed from https://www.thingiverse.com/thing:2996821 More on submarines:…
I got sick of the varied lengths of the 12 gauge hulls I reload (I use Win AA, Peters and Rem STS) and the way that affected my final crimp. Too long and they pinwheel, too short and I lose a BB or two. So I came up with this tool. This…
Through hull fitting and securing nut for pull cable operation. Printed in PETG
Use this ship hull as you like, put a motor in it, put it in your bathtub, sink it. (It should float)
This thing is a master of 'architectural reconfiguration,' as that flowery idiot Buttercup says. To the rest of us, it’s a giant, organic wrecking ball. The Hull Breaker doesn't just eat sailors; it eats the ship they're standing on. Its…
white until 6.2mm orange until 6.8mm finish with black
Test hull number 4 This test hull is made up of 3 files: 1. Hull test no.4 entire , in which the hull and deck are joined 2. Hull test no.4 hull 3. Hull test no.4 deck You can use it for tests, models or dioramas, but you can also try…
NOTE - a 1:10 scale model of this vessel can be found HERE Please NOTE , building a full sized boat from a model is NOT allowed for a certified Class Globe 580 This model is NOT in strict conformity with the original 580 Plans and is…
minifig sailboat hull
It is a RC boat with a 1/3 inch shaft with a motor and battery that can be put in with a rudder.
I made these to connect my brushless motors to a waterproof case that houses my speed controllers and battery with 10awg wires and 8mm bullet connectors. I personally print in ASA, but I also adjusted the sizing for PETG and the files are…
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10-15 minutes! Please note the settings in the…
This is a remix of the Wind-up Bathtub Boat V5 – with benchmark test – Badewannen Boot zum Aufziehen – Funktionsfähig by Mike . I slightly trimmed the underwater guides so the hull can be printed vertically. For me, this saved about 2–2.5…
This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4" diameter pipe hulls, as seen on the SV Seeker ROV. You'll want to print it flat side down. As always, Design files are…
The walls are quite thin, there is no different between 15% infill and 100% infill. It was made to be modular.
This is a (untested) replacement hull for TI-30X, TI-30Xa, TI-30Xa SOLAR, .. ? I'am sure I'am not the only one who has a broken one -_- . Hopefully you can just use the*.stl file. The* .scad code is an ugly hack I stitched together…
Hull mounted weapons for the Landraider Mk.1 like vehicle to bring it in line with Mk. 2 weapons loadout. Includes Twin Heavy Bolter, Twin Lascannon, and Reaper Autocannon. A Nurgle eye is included as a corrupt Auger Array. Category:…
No hassle thru hull for any plastic drybox. PTFE simply sits in the fitting and can be replaced with the plug for long storage time. I recommend 0.10 or 0.12 mm layers so you have a nice screwing 10 mm drillbit needed for instalation :…
a cheap bucket adapter for lifetime kayak with rope dry hull you use a 2.5 q bucket from lowes. i would recommend double sided taeping the adapter to the kayak to make it not fall out. how it works: this is a bucket dear god there is more…
12v Milwaukee Battery Enclosure for the SeaDoo ST3 Hull – Not for resale or remix. no supports required. the back of the holder sits on build plate 1st layer . printed with petgcf the cap is tpu Fixing – 50x6mm SS screw. 2 Blade…
50mm Hose Hull Adapter Developed for receiving 50mm hose output from vacuum turbo fan into and out of silencer box. Conical fit for hose. No clamp necessary under stationary conditions.
The Battlefront Flames of War (FOW) 1/100 German Panther/JagdPanther kit gives you the upper hull parts to make either Panther tanks or JagdPanther tank destroyers but not both as there is only one lower hull and track set. This file…
For an bigger Advent wreath I made an adapter stand to replace the candles it used before. https://www.thingiverse.com/thing:4011921 The stand worked perfectly, but the candles looked small. Also the white color wasn´t fitting, so I…
a quick to make little multihull use a 25mm dia tube, skewers, zip ties and a 3mm depronsail (or simple rig) Category: Vehicles
Shower Hull Trough, works with shower head very well, but not so good with mixer. Bavaria Cruiser 46 and many more Yacht Models support this kind of mount.
Just a Crank and a hull for easy handling. Works for many projects.
I bought the Skullshaver Beast Clipper Pro and found that all the accessories were just lying around causing a mess. Designed this little organiser so at least now it looks neat and less chance of me losing anything.
not much about this. Just print and enjoy. Tolerances are .15mm between the halves.
Addon for the HyperbolicParaboloid Cody18_1496478's HyperbolicParaboloid Printed with 0.6 Nozzle and 0.3 LH, scaled to 150%
A remixed version of the hull bolter turned to a flamer. There is way to many triangles for lack of detail, this is due to me being lazy.
The Hullwake Marshal directs boarding parties through failed airlocks and contested command decks. A sealed pressure suit, magnetic boots and a compact command display keep the officer ready to coordinate the next breach. Nharos seeks the…
Another Boat-Template for "BoatNerds" like me. Maybe i'll combine it with Triell Outriggers to build a Trimaran again... Category: Vehicles
Something to print in spiralize/vase mode and display next to all the Benchy's. After doing some firmware changes I needed something to print as a test. I didn't want to waste a lot of filament so I whipped this up. Have fun.... Print…
The Perry Rhodan series, launched in the 1960s, is an expansive science-fiction saga with over 3,000 volumes, each around 70 pages long. However, it has evolved far beyond just magazines—fans can explore its universe through books,…
(sale of the entire set upon request) This model is designed for further model modification after printing. Included: • A one-piece hull in actual size, for self-preparation for printing • A 1:50 scale hull cutout (final length - 424 mm)…
Free 1:200 version of an ASD harbour tug with full-hull and waterline options, built for scale modellers and port diorama builders. WHAT IS IN THE DOWNLOAD STL files for the 1:200 scale, one file per part, ready to slice. PRINT NOTES…
I printed this in ABS for durability in the summer heat at 100% infill. This part goes to the right keel of the paddleboard. Flip it on the slicer to get the one for the left keel.
An original, fully customizable submarine display model built entirely with native TrueGeometry Playground commands - no booleans, no external tools. Every dimension is a variable at the top of the recipe: hull length and 25 station…
Free 1:400 version of a handysize bulk carrier with deck cranes and open holds, built for scale modellers and port diorama builders. WHAT IS IN THE DOWNLOAD STL files for the 1:400 scale, one file per part, ready to slice. PRINT NOTES…
Free 1:400 version of an offshore supply vessel (PSV) with an open cargo deck, built for scale modellers and port diorama builders. WHAT IS IN THE DOWNLOAD STL files for the 1:400 scale, one file per part, ready to slice. PRINT NOTES…
![[for test printing] Project 1415 Flamingo type motorboat hull for 3D printing and customization, version 1.0](https://media.printables.com/media/prints/a3cfaf12-ca2a-4764-b593-61ba72ea9356/images/11141636_ada29b9c-f262-4ed7-ba78-89e2b2b0baec_975fca58-19af-4ab1-bbd0-008837fa6883/1415-hullstl.png)
