Reinforced Blue Robotics Thruster Mount for 4" curved pipe hulls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4"…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4" diameter pipe hulls, as seen on the SV Seeker ROV. You'll want to print it flat side down.
As always, Design files are available as well, just let me know what format you need
Print instructions
Unassociated tags: SV Seeker
Category: Robotics Summary
This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4" diameter pipe hulls, as seen on the SV Seeker ROV. You'll want to print it flat side down.
As always, Design files are available as well, just let me know what format you need
Print Settings
Printer Brand: LulzBot
Printer: TAZ 5
Rafts: No
Supports: No
Resolution: 0.5mm nozzle was used, but anything should work.
Infill: As close to 100% as you can get it.
Notes:
Printed in ABS.