Liczymy pasujące modele…
This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…
Thruster Guard: A Southern Ocean Subsea Creation Enhanced Durability: Designed specifically for the BlueRobotics T200 Thruster . Protection: Offers a robust shield against unpredictable underwater elements. Performance-Oriented: Carefully…
Support to hold e bike braking sensor on shimano MT200 brakes, left and right, no glue needed, it is held using the same fixing screw of the brakes, see photos. (but if you want to be more sure that it does not come off, you can use glue,…
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files
Original model from Thingiverse from RayTruant , this model is remixed to fit my Iphone 15 Pro with Rugged case and better 3d printer friendly now , you can print without any supports.
Spare parts for Autohelm (now Raymarine) AH800, AH1000, AH2000, ST1000, ST2000 tiller pilots. One version of the end plate is constructed without provisions for an o-ring. Original is with o-ring. Groove depth is chosen a bit shallower to…
This is a weed guard for use with Blue Robotics T100 and T200 thrusters. The front unit mounts under the stock nosecone. You will need two 10mm M3 stainless cap head bolts to mount this, the stock bolts are not long enough. The rear guard…
The T200 Mounting Bracket makes it easier to mount the T200 Thruster to a variety of surfaces. The mounting bracket is not required to mount the thruster, but if it is difficult to use the normal thruster mounting point, this mounting…
This is an intake air duct to use on a CT200 motorcycle
This is an update of my printable Blue Robotics Thruster intake guards for use with the T100 and T200 thrusters. The origional guard offers slightly less drag, but is weaker and more difficult to print. These guards are strong, can be…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
Short and Tall Caps for use on CT90 & CT200 Speedo's printed using TPU
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
This is a scan of a non-marring bumper for the Arrow ET200 electric brad nailer. Mine disintegrated after 12 years. I was able to get a replacement from the Arrow company, but this model is discontinued and there is a limited supply of…
This is a base gasket for use on a CT90 K0 or CT200 Air Filter Assembly printed using TPU
Designed for HAIBOXING 1:12 RC Desert Truck 2995 part number T2007
Printed from TPU 95A. I had a problem with my mt200 brakes in winter. Snow and ice melt on caliper and then re-freeze on the brake pads and disc, causing a significant loss of braking power.
Lexus CT200h fuse box cover - power outlet fuse V2a - suit for bigger piggy back fuse
UPDATED MODEL: https://www.printables.com/model/1329279-t200-thruster-shrouds-v2 Most thruster shroud models for the T200 thrusters have gaps exceeding the 12.5mm limit set by MATE for their ROV competition. These thruster shrouds are…
This is a model I made of the hard to find cowl clip for the edge part of the windshield cowl on a Lexus ct200h. I used the OEM one that I had (which I proceeded to drop into the wheel fender and lose). I make no claims of accuracy or…
An update from our previous model - these thruster shrouds are designed around a cleaner and more compact design, while still maintaining MATE ROV compatibility. Used by the Allan Hancock College UROV team “Deep Sea Dogs” for the 2025…
Designed for HAIBOXING 1:12 RC Desert Truck 2995 part number T2007
This model replaces the factory AUX/USB panel in the Lexus CT200h center console with a custom mount for modern charging modules. It is designed to hold common aftermarket USB units that provide USB-C Power Delivery (PD) and USB-A Quick…
This is a Battery Compartment bumper for a CT90 and CT200 printed in TPU
Adding the front suspension kit from Coleman to a CT200U removes the place to mount your front rack. These arms give tha
This is a design of a 250mm tire with DT200 rim interface which can be used as a replacement for the original Ardumower wheels. Main characteristics: Dimensions: 250 x 40mm ' Rim and tire are printed separately. So you can use a stiff…
Show off your support for qmansgarage with a keychain of my modified Coleman BT200X!
This is the usb Module I designed this for: BATIGE Square Type C 3.1 Car... https://www.amazon.com/dp/B0B284JR61?ref=ppx_pop_mob_ap_share This can be used for making a wired USB connection for CarPlay/Android Auto (my use case) . Or you…
Cupholder for Geekvape T200 Description: A holder designed specifically for the Geekvape T200, fitting into standard car cup holders. Ideal for people who want to keep their equipment close at hand and safe while driving. Features:…
ORGANIZZATORE GT200 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
My Mitshubishi T200 backpack cutter is too old to find/buy a new part so i had to make new throttle lever. Maybe are there a few things to improve but throttle lever is doing its job. What to improve: holes should be little bit smaller >…
This is a preliminary design of a cheap, lightweight FPV backpack. I wanted a system that was able to be carried by a variety of RC aircraft including my FT mini Scout and was also easy to assemble. Right now, this weighs in at 22g. It…
The Fujifilm X-T200 is prone to overheating, leading to the camera's shutting down while operating. I was surprised when I realized no official cooling fan was made for this model. Some use a PC fan and wire it to the camera, but that…
This is a filament holder for the IdeaWerk WT200 printer from Weistek, sold by RS. Useful width is 100 mm. The distance between holes is 41.5 mm. Este es un soporte para filamento para la impresora IdeaWerk WT200 de Weistek, vendida por…
Realized I lost my rear bleed nipple cover. Looked online for a replacement, which would've been 2-3 eur. This entire damn brake caliper costs like 10 euros new, so I just decided to print my own replacement lol I printed this in TPU with…
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…
These are little caps to cover the pallet cups in Paint Pallet by niget2002 This version doesn't quite fit if you cover side by side cups. New Version coming soon.
Base hinge part for the Gemini PT2000 turntable dust cover/lid hinge. This model doesn't have space for the spring to hold the lid open, but the STEP file is attached and can be modified. I printed with 4 walls, 30% cubic infill, 0.2mm…
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with WiFi Explorer Pro. (this one is for a thicker screen) Will print…
The part that holds the headlamp on the e-scooter. Printed in PETG with 100% infill on an Ender 3. Still going strong after more than a year on Prague's cobblestone streets™.…
NEW revision 2026-10-22 the original revision worked mechanically but didn't protect against water A 3D-printable replacement rear fender for the BlueTouch BT2000 electric scooter , designed to survive rough roads, potholes, cobblestones,…
This is the rear turnlight for Yamaha tw200 (225) and xt200 (225) bikes. I don’t actually know if this useful for other yahame bikes, so try. When installing, don’t forget to connect light bulb fist, so you don’t need to disassemble it…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
This adaptor allows the T Motor FT200 VTX to mount to 30x30mm hole pattern standoffs in an FPV quad. I recommend using PETG, ASA, ABS, or something more heat resistant to withstand the VTX heat output. I'm using Smart Audio, so I didn't…
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…
This is the usb Module I designed this for: BATIGE Square Type C 3.1 Car... https://www.amazon.com/dp/B0B284JR61?ref=ppx_pop_mob_ap_share This can be used for making a wired USB connection for CarPlay/Android Auto (my use case) . Or you…
These are little caps to cover the pallet cups in Paint Pallet by niget2002 This version doesn't quite fit if you cover side by side cups. New Version coming soon.
This model replaces the factory AUX/USB panel in the Lexus CT200h center console with a custom mount for modern charging modules. It is designed to hold common aftermarket USB units that provide USB-C Power Delivery (PD) and USB-A Quick…
This adaptor allows the T Motor FT200 VTX to mount to 30x30mm hole pattern standoffs in an FPV quad. I recommend using PETG, ASA, ABS, or something more heat resistant to withstand the VTX heat output. I'm using Smart Audio, so I didn't…
Für den Winter baue ich die Regner von meiner Berieselung aus. Damit kein Schmutz ins Gehäuse fällt habe ich eine Abdeckung entworfen.
I recommend printing with full infill, support only for the outer ring, and a layer height of 0.1 mm for the thread.
ARTE&DISIGN GT200 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Weed Guard for Blue Robotics T200 Thruster. Can be retrofitted to existing installations without removing the power cable.
