1 / 6
250mm Tire Model "Lawn" for DT200 Rims
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
250mm tire with DT200 rim interface for lawn mower applications.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a design of a 250mm tire with DT200 rim interface which can be used as a replacement for the original Ardumower wheels.
Main characteristics:
- Dimensions: 250 x 40mm
' - Rim and tire are printed separately. So you can use a stiff material (PETG, ASA) for the rim and a soft material (TPU) for the tire.
- Tire can be pressed on any rim with DT200 interface and additionally fixed with up to 12 (invisible) screws (2.9 x 22 mm).

- A 3-parts variant is provided which can be printed with standard printer size (210 x 210mm).

Printing
- Filament
- Recommended is TPU.
- Infill
- Depending on your needs and TPU characteristics (you can start with Gyroid 15%)
- Perimeters
- You should use enough perimeters to fill up the profile and the rim interface. For 0.3mm DRAFT this would be 5 perimeters:

- You should use enough perimeters to fill up the profile and the rim interface. For 0.3mm DRAFT this would be 5 perimeters:
- Support
- not needed