Skeg fin for Deflecting Debris around a hull mounted Bluerobotics T100 or T200 Thruster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you may want to use waterproof bolts per your usual method of attaching things anyways. This is designed for Stainless Steel M3 hardware
Pictures courtesy Darren Smith, used with permission
Print instructions
Category: Robotics Summary
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you may want to use waterproof bolts per your usual method of attaching things anyways. This is designed for Stainless Steel M3 hardware
Pictures courtesy Darren Smith, used with permission