wallmount shelf with visible hexagon infill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Less than 3h with input shaper on the MK4. It prints upside down (without the fruits, of course ;)
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello friends from all over the world :)
This is a remix of my Hexagon shelf for the first aid kit.
With the keyholes in the back side, it’s easy to mount with two 4mm Wood countersunk screws (and two plastic anchors).
Printed without supports and 0,2mm layer height with input shaping on my MK4.
Don't forget to chamfer the top edge a bit, since it is printed upside down. I wanted good bed adhesion, I didn't add a chamfer in CAD.
If someone likes this design, it would be great if you also give it a like and post a make ;)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This model is free for non-commercial purposes. If you'd like to sell it or use it in a commercial environment, just write me a message, we'll work something out.
Anything you print or do, you do it on your own risk. Be safe and have fun :)