DJI Air Unit - Pan Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Pan only DJI FPV System camera mount that goes with my DJI Actively Cooled enclosure.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 912
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Pan only DJI FPV System camera mount that goes with my DJI Actively Cooled enclosure. It has vibration damping (a little anyway) using the Mateksys FC mounts. The base is cut to fit the TRX-4 Sport roof-rack and uses zip-ties to hold it place.
You'll need:
4 x M3 8mm
4 x M3 nuts
8 x M2 8mm (two for the servo, two for servo horn (optional) and 4 for the camera)
1 x Mateksys FC Vibration Dampening (4 x M3x7+4.5) SKU: VD-M3
1 x hexTronik MG14 servo (or similar 14g servo)
1 x servo Y cable (or your own radio solution)
Notes:
You'll likely wants support for the camera holder; it makes the servo arm area much cleaner after printing. The two other parts do not need supports.