Traxxas Summit - DJI Air Unit - Pan Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pan only DJI FPV System camera mount that attaches to the roll-cage of the Traxxas Summit.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a Pan only DJI FPV System camera mount that attaches to the roll-cage of the Traxxas Summit. It works with my DJI Actively Cooled enclosure. It has vibration damping (a little anyway) using the Mateksys FC mounts. It also includes mounts for a 6" light bar, in my case the Proline 6" Super-Bright LED (6276-02).
Enclosure: Dual Fan or Single Fan/Compact
You'll need:
4 x M3 8mm
4 x M3 nuts
8 x M2 8mm (two for the servo, two for servo horn (optional) and 4 for the camera)
1 x Mateksys FC Vibration Dampening (4 x M3x7+4.5) SKU: VD-M3
1 x hexTronik MG14 servo (or similar 14g servo)
1 x servo Y cable (or your own radio solution)
8 x 2.5mm by 100mm zip ties (for holding the mount to the roll-cage; shorter is ok)
Optional:
1 x Proline 6" Super-Bright LED (6276-02).
2 x M2 x 18mm (or 16mm or 20mm also work)
Notes:
You'll need supports, but only for the 'legs'. See my attached image for where supports need to be.