Cat Treat Dispenser / Cat Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mountable and filable cat toy
- Ocena
- 5 / 5
- Polubienia
- 130
- Pobrania
- 752
- Wydruki
- 6
- Wyświetlenia
- 3007
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple cat ball toy, which can also be filled with treats.
Made several versions with various numbers of holes.
While no cat should be able to destroy the “heavy” variant - be sure, your cat is not strong enough to destroy the “light” variant.
Print Settings:
- no supports
- 15% infill
- PLA
- raft, if you need one (printed mine successfull without raft)
Depending of the treats you want to use, you might need to scale up the parts due to the hole size.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________
UPDATE-HISTORY:
------------------------
UPDATE 24.10.2023
Added a few more parts, optimized for flex material. The new parts are available with wall-thickness of 1,5mm and 2,0mm.
I've printed mine (the orange one) with “Overture TPU” filament and the standard prusa slicer settings for flex-filament. The connector also works well with TPU.
Keep in mind, that you should NOT print TPU directly on your PEI sheet.