Doorstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Universal door stop with a spring stop mechanism
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1864
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This model has been replaced by an updated design: https://www.printables.com/model/631025-door-stop-door-stop
This is a universal fit door stop with a spring loaded mechanism that tensions against your floor. Click it up and the door moves freely. No more clutter sitting around on your floor!
There is an optional TPU foot for wood/tile floors.
There is a printable spacer that you can cut to height in your slicer depending on your door/floor gap.
While this will tension fit without screws, there are 3X 3mm holes if you want to anchor it.
Files are in the correct orientation for printing. Print in Door Stop PLA, rubber foot in TPU. No support needed!
Fits doors with a gap of 18mm and larger.
Make sure to press the tension key in very firmly with two hands to apply strong gripping force.
If you dig it, please give it a like. Thank you! :)
10/26/23 Complete re-design with short/medium/tall heights. Added a tension key so no tools or screws required. Improved the ergonomics and function of latch.