1 / 8
Wordclock Wortuhr german + english, RGB 16x16 Matrix, ESP32 D1 Mini, Multicolour AMS ready (remix) — zdjęcie 1
1 / 8

Wordclock Wortuhr german + english, RGB 16x16 Matrix, ESP32 D1 Mini, Multicolour AMS ready (remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy printable Wordclock, solid front only one colour change needed and less hassle wih letters

Ocena
0 / 5
Polubienia
17
Pobrania
184
Wydruki
0
Wyświetlenia
1402
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate.


I only remixed DE+EN Fronts so far, other languages would take litte work if someone needs it but had no use for myself.

 

I love his clock in general, but I did not like those Sharp Edges in the corners, feels not good to print without warping on such a large print.
This model is printable with default Bambu settings - so much faster than original. 
Another BIG advantage is that clock can be read from sides in a much larger angle.

 

M3f Frames are already painted for 2 Colour AMS, you want to use white for first 2 Layers (front/letters) and a real dark colour for the rest that Leds do not shine through.

to Print:

each 1x Back, Fixer and Frame in your language.

 

Using a textured PEI gives a real nice front, but plain plates should also word great
PLA is fine, not tested if PETG does good Job with all the letters but should also work.


Needs following Accessories to assemble:
1)
Securing the Back Plate
4* Brazz Inserts M3xOD5xL3 (like used in P1P ARC Case)
4* 6mmxM3 screws
or use
slim dual sided tape / posterstrip / hot glue - only when the clock is standing

 

2)
Internals
1x BTF Lightning 16x16 LED matrix (for example WS2812BECO on Amazon)
1x AZDelivery ESP32 D1 Mini NodeMCU

 

3)
Power
1x USB power supply 5V / should be >=2A if you go >3A would give some error margin
1x Micro USB cable

 

Hardware Assembly:

  • melt the brazz inserts into the frame
  • flash software to D1 before soldeing as function test
  • cut not needed "out" cable on the RGB matrix (if ou wan it clean unsolder the +/- cables too)
  • solder this cable to D1 mini (pic attached)
  • press fit D1 Mini on Back, to be sure it holds attach some hotglue 
  • Connect with matrix using the cables
  • put matrix in Place (see picture for orientation) and secure it the RGB-fixer
  • Close back and softly fasten with 4 screws
  • Power On and bind your Wifi
     

Tagi