Currency Holder for #Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coins go at the bottom of the external bin, which itself has special detents to suspend inner boxes sized for notes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This model could be used for anything where you need to separate two different things in the same category - in this case, notes and coins.
Outer bin holds coins. It's a standard 2x1 Gridfinity bin with 3 compartments but with an additional internal lip halfway up the bin on the inside. The lip is designed to act as a stopper for the inner bins which fit inside (not too snug).
Inner bin holds rolled-up notes, with place for label. The label holder extrusion continues down further than normal, so the notes stay upright. Hopefully makes sense if you look at the pics.
Storage capacity: good for about 10 coins per section. It just fits a 50p and 2p coin, which are larger than most other coins I have. The coin storage isn't huge by any means. I could have made the detent for the notes bin higher, to store more coins. But then the height wouldn't fit in my bedside table.