1 / 9
Prusa i3 Mk3/s/+ Nozzle Cam Upgrade for 8mm Cam — zdjęcie 1
1 / 9

Prusa i3 Mk3/s/+ Nozzle Cam Upgrade for 8mm Cam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an Upgraded Cable Holder for the Prusa i3 MK3/s/+ with no Problems for the Selftest, Autohome, Wizard.

Ocena
5 / 5
Polubienia
28
Pobrania
99
Wydruki
3
Wyświetlenia
1302
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an Upgraded Cable Holder for the Prusa i3 MK3/s/+ with no Problems for the Selfttest, Autohome, Wizard and Large Prints. I printed it with das Filament PETG with no Problems.

It is Important to use PETG or even more Temp resistant material, because the camera heats up threw the heatbet and threw itsself.

If you want to use an cam with a smaller diameter just print yourself an adapterring.

Maybe i will Provide an updated file for Smaller Cameras.

The Camera is Secured by a Ziptie 165x25 the same who prusa provides with the printer.

I made sure its an easy install. You can use the old screw from the Holder before. Its an M3x40 Screw.

The cam i use i have tested for like 48 hours constant printing. Works so far.

Have fun with it Happy Printing.

Tagi