adjustable connector bar for photographic sweep stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had to place the already great photograpic sweep stand on a platform which was narrower than the paper (or used…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to place the already great photograpic sweep stand on a platform which was narrower than the paper (or used background) was wide.
So I designed this bar as a connector for the two legs, with this the left and right leg can be fixed together. With the help of this bar and the block in the middle, the sweep can be placed on a platform while both of the legs can "levitate in mid air"
With the big screw the distance between both legs can be adjusted, in order to fit different paper- or background sizes. With around 32.5cm at the widest position.
Credits also to user DuaneIndeed (https://www.thingiverse.com/thing:2324229) where I took the bolt screw from...
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
at least 25%
Filament: 3DJake PLA or PETG white
Notes:
I used PETG as it was the only one I had on hand. Preferably you would use PLA, as it is more rigid than the somehow flexible PETG.
Part "paper sweep addon\_connector\_complete.stl" needs support in between the walls.The screw and both bars can be printed without support.
Post-Printing
Glueing the bar to both legs
Just glue the rounded part on one leg and the flat part to the other leg (see other pictures for more details)
Keep attention for the correct alignment, as there is one bar with a rounded corner, while the other has just a square cut.
Category: Camera