Wall Mount for Immax Atmosphere Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn an inexpensive atmosphere lamp into a practical bedside wall lamp.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I was looking for a bedside lamp, I came across Immax Atmosphere Lamp (https://www.immax.eu/immax-neo-lite-smart-atmosphere-lamp-3w-rgb-cct-color-and-white-dimmable-wifi-p13862). It suited me with all the parameters: control via the mobile app, but also via a button that can switch modes; sufficient luminosity, minimalist design, advantageous price... The only downside is that it is sold only with a cradle from which it shines into the ceiling.
So I designed a holder that attaches the lamp to the wall and allows it to be adjusted to different positions - both for reading and for creating atmosphere. My design allows rotation in two axes to achieve any angle you need.
For assembly, you will need:
2x bolt and nut: 3 x 12 mm
3x bolt and nut: 4 x 12 mm
2x screw and wall plug: 4 x 40 mm
Printing instructions
- Print all the parts in original position. Supports are needed only for the inserts.
- You can increase the number of perimeters for more stiffness.
- I have printed mine with PLA, but PETG might be even better.