Wall Mount for Immax Atmosphere Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.23 – €1.51 net (excluding VAT)
For file: Immax-wall-mount_by_PhiGl_RING_0.4n_0.2mm_PLA_MINI_1h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.47 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Turn an inexpensive atmosphere lamp into a practical bedside wall lamp.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When I was looking for a bedside lamp, I came across Immax Atmosphere Lamp (https://www.immax.eu/immax-neo-lite-smart-atmosphere-lamp-3w-rgb-cct-color-and-white-dimmable-wifi-p13862). It suited me with all the parameters: control via the mobile app, but also via a button that can switch modes; sufficient luminosity, minimalist design, advantageous price... The only downside is that it is sold only with a cradle from which it shines into the ceiling.
So I designed a holder that attaches the lamp to the wall and allows it to be adjusted to different positions - both for reading and for creating atmosphere. My design allows rotation in two axes to achieve any angle you need.
For assembly, you will need:
2x bolt and nut: 3 x 12 mm
3x bolt and nut: 4 x 12 mm
2x screw and wall plug: 4 x 40 mm
Printing instructions
- Print all the parts in original position. Supports are needed only for the inserts.
- You can increase the number of perimeters for more stiffness.
- I have printed mine with PLA, but PETG might be even better.