Nucleo WB55 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean remix of a case for a STM32 P-Nucleo-WB55 (STM32WB55) prototyping dev-board.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed to protect your Nucleo STM32WB55 microcontroller board, with a snap-fit design for easy assembly and disassembly. It also has cutouts for all of the board's ports and connectors, so you can use it without having to remove it from the case. Plus, it's easy to 3D print without support!
The fit is designed to be tight : you may have to scrape/sand a bit depending on your print quality and nozzle size.
Don't hesitate to post a picture of your make !
Note: This is a remix. The original design was made by szastamasta on thingiverse.
I made the following changes:
- Adjusted the tolerances
- Removed logos and holes
- Made a closed version for transport