Liczymy pasujące modele…
A little case for the ST Microelectronics Nucleo-64 Development Kit. Check the list below for compatible boards. The board should sit quite firmly in the case itself and is held down by additional screws. The screw on the left side is…
The spacing between the holes in the bottom is 18 mm. There are three 2 mm holes for mounting the Nucleo board. You need mini screws like DIN 7981 2,2 mm x 6,5 mm. The holes in the bottom are 3.5 mm to comfortably fit M3 screws. Other…
I needed some kind of protection for my nucleo board so I won't kill it with ESD. I tested it with the L452RE and L452RE-P (the variants with miniUSB and microUSB), but it should fit most if not all Nucleo-64 formats. You need M3x8 screws…
simple case for STMicroelectronics Nucle F411 RE, arduino headers and buttons accesible
A minimal, protective half-case for the STM32 Nucleo-144 development boards, with heat set inserts and screws.
A little case for the ST Microelectronics Nucleo-144 Development Kit. Check the list below for compatible boards. The board should sit quite firmly in the case itself and is held down by additional screws. The screw on the left side is…
Slide cases for every 64 pin STM32 Nucleo boards.
For best effect print with PET-G (PLA is also fine, but the clips will be less flexible). Prints without supports. In the photo: NUCLEO-H563ZI
Great base by loco but I needed to throw it in my bag, so I created a lid for it. Two versions: one with text and one without. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15…
Super-simple, minimal bumper for ST Nucleo F4* / Nucleo 64 MB1136 boards.
I started studying the programming of STM32 microcontrollers and got one of the Nucleo-64 boards for practice. One of the annoying moments was having it freely “gliding” on the surface of my desk with metal connectors being exposed to…
Features: Flexible buttons. Reset button indicated with inset circle: Strong enclosure for impacts and transport Snap-fitting lid No hardware for assembly (only for optional fan) Mounting provided for 30mm fan (ensure your fan isn't too…
I really like the Nucleo-64 and Nucleo-144 boards. They have Cortex-M 32 bit processors on them, are supported by a wide variety of development environments (gcc, mbed, Etc.) and with an Arduino compatible set of connectors, many Arduino…
Updated : Added additional ribs for support. This is designed to have the short M3 heat-set inserts put into it. Personally, I use the ones from CNC Kitchen . I use M3 6mm socket head cap screws. This should work with all NUCLEO 64…
Hi, this is the case for STLink-V2 programmer which is part of STM32 NUCLEO boards (64 pins or 144 pins). The programmer can be separated from the board and used as standalone device. All available pins are exposed (SWD port, TX, RX, GND,…
A clean two-part enclosure for the STM32 Nucleo-64 F446RE development board. The lid attaches with a press-fit — no screws or glue required. Designed cutouts: USB port (CN1) for cable access User buttons B1 and B2 Morpho headers CN7, CN8,…
This case is designed to protect your Nucleo STM32WB55 microcontroller board, with a snap-fit design for easy assembly and disassembly. It also has cutouts for all of the board's ports and connectors, so you can use it without having to…
A half shell case for the ST Microelectronics Nucleo-144 line of boards. Check the list below for tested boards. Many of the cases today rely on screws to hold them down. With some of the later Nucleo boards there are too many components…
I found plenty of mounts for Arduinos and PIs, but nothing for the STM32 Nucleo. So I made this. My board is the STM32-F446RE. It mounts to the 3 standoffs with M2 20mm bolts (18mm will probably do). There is space for a small breadboard,…
A docking station for your breadboards and nucleo 144 boards. The Nucleo board fits snuggly enough on the base, but you can secure it with heatset inserts (M3) and bolts, but be careful when screwing the bolts (M3x12) not to damage the…
Case for Nucleo STM32G491RE Using it will prevent scratches on you working desk. Lack of top portion makes pins, buttons and LEDs reachable. Contact me for model of different nucleo boards. If you like my work please Like , Download and…
A case for Nucleo-H503RB, with opening for USB-C ports. 2 versions, one is shorter, exposing the top parts (pin headers), the other one is longer, covering the top parts. Should fit most USB-C cables. Only for Nucleo-H503RB and similar…
A simply base to hold down STM32 Nucleo-64 development board. This way the bottom pins are not touching any surface (so no shortcircuit or scratching). Additional you can put it back into the cardbox and it should not arttle around. I…
Surface model of a complex between the nucleosome core particle and a 146 bp long DNA fragment (PBD ID 1AOI). The DNA should be printed in flexible TPU while the histones core in rigid PLA. The flexible material allows for the DNA…
https://www.rcsb.org/structure/1aoi
ST Microelectronics Nucleo 64 Case Bottom half Nucleo64 Case No access to pins from the bottom
Edit: Added version without keychain addon and my .blend file A simple remix of the cool model by mirabatek. My changes: uses M3 screws instead of M2 chamfered edges instead of rounded (better suited for 3D-printing) open holes for GND…
A simple and functional case for your STM32 Nucleo board with an embedded logo lid that clips onto the base. The board can either be simply placed inside the bottom part of the case or be secured in place with the included rings (XY hole…
Can be used on various Arduino and STM Nucleo boards: Arduino Zero Arduino Uno Arduino Due Arduino Leonardo Arduino Mega STM32 Nucleo64 boards It can be used on any board that has the same hole position as Arduino Uno board. One example…
Base case for NUCLEO-N657X0-Q development board.
Added EXT mounting holes
The tiles represents either a proton or a neutron depending on what side is facing upwards. Positive and negative pegs enables them to be attached to each other in a hexagonal structure. In a classroom setting the student may use these…
use 4-40 square nuts and ¾" screws* allows access to top and bottom pin headers prints without supports little rubber feet are nice to keep the usb cable from wagging the dog *i think one of the screw heads interferes with the CN9 female…
A simple enclosure design for my Stm 32 nucleo board with cut-outs for push buttons and the top headers it snap fit to each other and require only few m2.5 self tapping screws to attach it to the base l
To mount a Nucleo board to this only M3 screws are required. The holes are 11mm deep, so with the Nucleo attached at maximum a M3x12 screw can be used. M3x6 or M3x8 is probably already sufficient.
Case for STM32 Nucleo 64 and CADETECH MILUINO boards (and for the all sharing the same housing)
En las imágenes aparece una placa adicional que utilizo para adaptar la salida a cable plano flexible. Entre el radiador y el L6230 utilizo un pad termico. Los tornillos son de M3 rosca para plastico cabeza de allen.
Nucleo boards are inexpensive, powerful development boards from STMicro for their STM32 family of microcontrolllers. Albeit they break out all the signals from 64-pins packages, they're unfit for an easy use with breadboards. This coaster…
This is a holder for the P-NUCLEO-WB55 development board, which is a Nucleo-68 board. The support walls are extra long so that the Morpho pins can be accessed. FreeCAD source files included as well.
No support. Just making sure print with the top upside down
This 3D model represents the nucleosome based on the 3C1B X-ray crystallography structure. It illustrates the organization of DNA wrapped around the histone protein core, the fundamental unit of chromatin in eukaryotic cells (in this case…
This model shows that Adenine connects with thiamine and guanine connects with cytosine.
Remix of @petrilli https://www.printables.com/model/815721-holder-for-stm32-nucleo-f411re-board Heat inserts are not required, you just screw the M3 into the print. 2.8mm diameter hole works well on Prusa printers.
Please like and follow and post your makes Phosphate Group Nucleotide Lesson for Biology building block of DNA Print standard settings. Phosphate Sugar and Nitrogen Base
As described in the summary, this is a widened and lengthened body of the S.M.A.R.S Robot, to fit a Nucleo U083RC board. Link to the original S.M.A.R.S: https://www.kevsrobots.com/blog/smars.htmlhttps://www.kevsrobots.com/blog/smars.html…
Please like follow and post your makes As you know: DNA is composed of four nucleotide bases: adenine (A), thymine (T), guanine (G), and cytosine (C) . These bases form specific complementary pairs through hydrogen bonds, where adenine…
Half-case for NUCLEO-L552ZE-Q with breadboard pockets Tray for the NUCLEO-L552ZE-Q (Nucleo-144, MB1361) with pockets for a 400-point half breadboard and a 170-point mini breadboard. Hole positions were taken from ST’s PCB design files…
Features: Flexible buttons. Reset button indicated with inset circle: Strong enclosure for impacts and transport Snap-fitting lid No hardware for assembly (only for optional fan) Mounting provided for 30mm fan (ensure your fan isn't too…
A DIN-Rail mount for Nucleo-64 boards. Remix of the https://www.thingiverse.com/thing:2610621
This is a holder for a stack of 5 Nucleo development boards. The holders can be screwed together to make larger stacks using m3 bolts. You should be able to thread them directly into the plastic. It might be nice to attach some rubber…
