Silicia Spool Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silicia Container in Filament Spool Shape with Infill Pattern
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
You can dry this Silicia Spool in your Filament Dryer
Outer Diameter: Ø125mm
Height: 52.6mm
Use the Project files or the Print Instruction below.
Print Instructions

load the Model into your PrusaSlicer, select the Part and click “Split to Parts”.
On the right side, you can see the two splitted parts.
Right click on the bottom part and add “Infill” and “Layers and Perimeters”

Click on the new added Configurations, set the Infill to 60% and use Triangle pattern.
Set the solid Bottom and Top Layers to zero.
Set the Perimeter to one.
That's it, just slice!
printed in 0.3mm with PETG