Benchtop Power Board mount in ATX screw layout v 1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for benchtop adapter inside of an ATX case so the benchtop mount doesn't rattle around or get shorted.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this so it is possible to easily house several small devices i.e. Raspberry Pi or cubie inside of an ATX case, powered by ATX power supply via 5v rail through a benchtop adapter.
The benchtop mount makes cable management and arranging everything in general inside the case a lot easier.
V 1.1 Using NopSCADlib hanging_hole for better printing M3 nut traps.
Hardware Required
* 4x m3 10mm bolt
* 4x m3 nut
* 4x ATX mount screw
Libraries used in .scad file can be found at – https://github.com/avolkov/openscad-designs/ along with the up-to-date source file of the model.