1 / 3
Benchtop Power  Board mount in ATX screw layout v 1.1 — image 1
1 / 3

Benchtop Power Board mount in ATX screw layout v 1.1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount for benchtop adapter inside of an ATX case so the benchtop mount doesn't rattle around or get shorted.

Rating
0 / 5
Likes
3
Downloads
32
Makes
0
Views
437
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

I designed this so it is possible to easily house several small devices i.e. Raspberry Pi or cubie inside of an ATX case, powered by ATX power supply via 5v rail through a benchtop adapter.

The benchtop mount makes cable management and arranging everything in general inside the case a lot easier.

 

V 1.1 Using NopSCADlib hanging_hole for better printing M3 nut traps.

 

Hardware Required

* 4x m3 10mm bolt
* 4x m3 nut
* 4x ATX mount screw

 

Libraries used in .scad file can be found at – https://github.com/avolkov/openscad-designs/ along with the  up-to-date source file of the model.