Hex Screw Bit Holder -The Longer-
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remade based on hex bit holder by JakeTheMaker; longer, better, faster, stronger*
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 406
- Wydruki
- 9
- Wyświetlenia
- 1901
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Remade based on holder by JakeTheMaker and some reference to the original. My main mission was the make the cover (aka clip) part long enough to support 2 inch and 3 inch bits. I didn't need the belt/pocket clip feature so I ditched it. hanging 3" bits off your belt would be unwieldy anyway. Also because I was printing in PETG to survive in hot cars and garages I needed to adjust the fit of the tray and didn't need any spring mechanism for rotation.
- Modified short tray
- Modified long tray, to sit flat
- 1" (25mm) cover
- 2" (50mm) cover
- 3" (75mm) cover
*Longer, but not actually demonstrably better, faster or stronger.