Filament Spool Spinner for Commercial Chef (Westinghouse WFD100W) Filament Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is V1 so be easy on me Allows spools to spin freely enabling printing from Filament Dryer
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is made to fit on the bottom tray of a Commercial Chef (Westinghouse WFD100W) Filament Dryer/ Food Dehydrator. Nine ¼" inch Ball Bearings roll inside a track allowing the spool resting above it to spin effortlessly. (honestly, it spins pretty well without bearings.) Pack of 100 ¼" ball bearings on Amazon for like $8.
2 Pieces (track, spinner)
Material Recommendation: Becasue this will be directly over a heating element, I recommend using a more heat-resistant material like PETG.
Print Settings:
Layer Height: .2
Wall Thickness: .8
Infill: 10% Gyroid
Supports: No
Extra: An additional spacer ring to accommodate different-sized spools can easily be made for a perfect fit.
Thanks for joining me on my first print, this is still under construction :)