Filament Spool Spinner for Commercial Chef (Westinghouse WFD100W) Filament Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is V1 so be easy on me Allows spools to spin freely enabling printing from Filament Dryer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is made to fit on the bottom tray of a Commercial Chef (Westinghouse WFD100W) Filament Dryer/ Food Dehydrator. Nine ¼" inch Ball Bearings roll inside a track allowing the spool resting above it to spin effortlessly. (honestly, it spins pretty well without bearings.) Pack of 100 ¼" ball bearings on Amazon for like $8.
2 Pieces (track, spinner)
Material Recommendation: Becasue this will be directly over a heating element, I recommend using a more heat-resistant material like PETG.
Print Settings:
Layer Height: .2
Wall Thickness: .8
Infill: 10% Gyroid
Supports: No
Extra: An additional spacer ring to accommodate different-sized spools can easily be made for a perfect fit.
Thanks for joining me on my first print, this is still under construction :)