Hockey / Football / Soccer Goal Magnetic Target
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Targets that magnetically attach to a goal frame.
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 429
- Wydruki
- 2
- Wyświetlenia
- 3213
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
These targets use 30x10x5mm magnets to attach to a goal frame. There's a small, medium, large, and corner target. (Your mileage may vary on the corner piece, depending on the dimensions and shape of your goal.)
Print these on the short flat side (where the magnet goes), with 5 perimeter layers for extra strength. No supports needed. I used PETG. When printing, make sure the wide part of the paddle is facing forward; this minimizes bed movement, reduces wobble, and yields a smoother print.
Pay extra attention when printing the corner piece. One magnet hole has two tiny non-functional holes next to it to indicate the side that needs to be at the bottom when printing; the other hole is slightly larger to accommodate small sag. (The magnet will still fit perfectly.)
Secure the magnets with super glue.