1 / 3
Adapter für Festool CT22e mit D36 auf 37mm Vakuumschlauch und 37mm Vakuumschlauch auf 56mm Aufnahme am Zyklonabscheider / Connector for Festool CT22e with D36 to 37mm suction hose and 37mm suction hose to 56mm mount on cyclone separator — zdjęcie 1
1 / 3

Adapter für Festool CT22e mit D36 auf 37mm Vakuumschlauch und 37mm Vakuumschlauch auf 56mm Aufnahme am Zyklonabscheider / Connector for Festool CT22e with D36 to 37mm suction hose and 37mm suction hose to 56mm mount on cyclone separator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Festool CT22e D36 to 37mm suction hose and 37mm back to 56mm mount on cyclone separator, supports free

Ocena
0 / 5
Polubienia
13
Pobrania
76
Wydruki
0
Wyświetlenia
676
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Um gegenüber meinem anderen Aufbau einen der beiden Festool Staubsaugerschläuche zu sparen und den Saugweg zu verkürzen habe ich die beiden folgenden 90° Adapter entworfen. Funktionieren super und mit folgenden Druckereinstellunden auch bei schwerem Gebrauch immer noch ohne Schaden im Einsatz.

Drucker: Ender 3 S1 Pro
Düse: 1 mm
Auflösung: 0,32 mm
Brim: no needed
Material: PLA
Infill: 100%
Orientierung des Modells in Cura: Auf dem kurzen 45° gewinkeltem Übergang liegend (Bild)
Weitere Cura Einstellung: make overhang printable

____________________________________________________________________________________________________________

To save one of the two Festool vacuum hoses compared to my previous setup and to shorten the suction path I have designed the following two 90° adapters. Function super and with the following print settings even with heavy use still without damage.

 

Printer: Ender 3 S1 Pro
Nozzle: 1 mm
Resolution: 0,32 mm
Brim: no needed
Material: PLA
Infill: 100%
Orientation of the model in Cura: lying on the short 45° angled part (picture)
Other Cura setting: make overhang printable on

Tagi