Adapter für Festool CT22e mit D36 auf 37mm Vakuumschlauch und 37mm Vakuumschlauch auf 56mm Aufnahme am Zyklonabscheider / Connector for Festool CT22e with D36 to 37mm suction hose and 37mm suction hose to 56mm mount on cyclone separator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Festool CT22e D36 to 37mm suction hose and 37mm back to 56mm mount on cyclone separator, supports free
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 76
- Makes
- 0
- Views
- 676
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Um gegenüber meinem anderen Aufbau einen der beiden Festool Staubsaugerschläuche zu sparen und den Saugweg zu verkürzen habe ich die beiden folgenden 90° Adapter entworfen. Funktionieren super und mit folgenden Druckereinstellunden auch bei schwerem Gebrauch immer noch ohne Schaden im Einsatz.
Drucker: Ender 3 S1 Pro
Düse: 1 mm
Auflösung: 0,32 mm
Brim: no needed
Material: PLA
Infill: 100%
Orientierung des Modells in Cura: Auf dem kurzen 45° gewinkeltem Übergang liegend (Bild)
Weitere Cura Einstellung: make overhang printable
____________________________________________________________________________________________________________
To save one of the two Festool vacuum hoses compared to my previous setup and to shorten the suction path I have designed the following two 90° adapters. Function super and with the following print settings even with heavy use still without damage.
Printer: Ender 3 S1 Pro
Nozzle: 1 mm
Resolution: 0,32 mm
Brim: no needed
Material: PLA
Infill: 100%
Orientation of the model in Cura: lying on the short 45° angled part (picture)
Other Cura setting: make overhang printable on