Bambu Lab Tool Head Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip/retainer for Bambu toolhead
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 436
- Wydruki
- 3
- Wyświetlenia
- 3174
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A simple clip to press into the 2 pieces of the Bambu Labs toolhead to keep it from falling apart. Will work on the X1series and P1series.
Several times my toolhead has shaken itself apart, once taking one magnet, then a few months later taking 2 magnets* with it. So I drew this up quick and dirty to keep the 2 parts from having any chance to wobble themselves apart.
Printed this on an old beat-up Raise3D at work and it seemed to just snug enough so you might have to scale it up or a down a few % to get it perfect coming off whatever you print it with.
*Side note: bite the bullet and use 2 part epoxy to put the magnets back into the head, super glue is simply too brittle and will get rattled until it breaks apart.