1 / 3
2D Plate Patent Art Wall Frame — zdjęcie 1
1 / 3

2D Plate Patent Art Wall Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frame for 2D Plate patent art, hangable in two orientations with nail/hanger, or adhesive strips.

Ocena
5 / 5
Polubienia
47
Pobrania
111
Wydruki
3
Wyświetlenia
512
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Frame for 2D Plate patent art, hangable in two orientations with nail/hanger, or adhesive strips. Uses French-cleat style mount.

Inspired by Ken Mills' patent art 2D plates (https://www.printables.com/@nightfallvt ), I made this frame. It is made to fit his and other makers' wall plates (the odd dimensions of 192.71mm x 128.19 mm). 

The patent art pictured is my NASA Astronaut art found here: https://www.printables.com/model/625699-nasa-astronautspace-suit-patent-art 

Printed in Inland Matte Wood Brown PLA. Your temperature may vary with regular PLA vs matte.

Printing Instructions:

  • Recommended: Infill: 25%, 0.4mm nozzle, 0.2mm layer height
  • When the print is finished, allow for the bed to fully cool! Otherwise your frame will warp.

Assembly Instructions:

  • Slide ~1.16mm art plate into the frame, and secure with superglue or other glue of choice. 
    • Be very conservative with the glue otherwise it will bleed onto the art!

Thanks!

Tagi