1 / 3
2D Plate Patent Art Wall Frame — image 1
1 / 3

2D Plate Patent Art Wall Frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Frame for 2D Plate patent art, hangable in two orientations with nail/hanger, or adhesive strips.

Rating
5 / 5
Likes
47
Downloads
111
Makes
3
Views
512
Reviews
3

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial — Share Alike

Frame for 2D Plate patent art, hangable in two orientations with nail/hanger, or adhesive strips. Uses French-cleat style mount.

Inspired by Ken Mills' patent art 2D plates (https://www.printables.com/@nightfallvt ), I made this frame. It is made to fit his and other makers' wall plates (the odd dimensions of 192.71mm x 128.19 mm). 

The patent art pictured is my NASA Astronaut art found here: https://www.printables.com/model/625699-nasa-astronautspace-suit-patent-art 

Printed in Inland Matte Wood Brown PLA. Your temperature may vary with regular PLA vs matte.

Printing Instructions:

  • Recommended: Infill: 25%, 0.4mm nozzle, 0.2mm layer height
  • When the print is finished, allow for the bed to fully cool! Otherwise your frame will warp.

Assembly Instructions:

  • Slide ~1.16mm art plate into the frame, and secure with superglue or other glue of choice. 
    • Be very conservative with the glue otherwise it will bleed onto the art!

Thanks!

Tags