Makita sander 90deg holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a simple tool for 90deg edge sanding. I was inspired by Festool AH-ES-ETS/ETSC
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
It is a simple tool for 90deg edge sanding. I was inspired by Festool AH-ES-ETS/ETSC
Sometimes is difficult to make flat 90deg edge - especialy when the board is thin. This tool set 90deg and avoid to change flat edge to concave shape.
I used M3 and M4 screws and thread insert for assemble components together. Lenght of the screws is not critical.
Inserts - 4x M4 (6mm diameter, 6mm long)
Screws (ISO4762, DIN 912):
1x M3 x 20 (it is hing or axis)
1x M4 x 20
1x M4 x 16
2x M4 x 12
I used 10mm MDF board on the end of arm because it doesn't scretch the sanded boad, but it is not critical - you can replace by plastic board with some soft surface
Material is PLA, 4 perimeters …