Makita sander 90deg holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a simple tool for 90deg edge sanding. I was inspired by Festool AH-ES-ETS/ETSC
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 91
- Makes
- 1
- Views
- 995
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
It is a simple tool for 90deg edge sanding. I was inspired by Festool AH-ES-ETS/ETSC
Sometimes is difficult to make flat 90deg edge - especialy when the board is thin. This tool set 90deg and avoid to change flat edge to concave shape.
I used M3 and M4 screws and thread insert for assemble components together. Lenght of the screws is not critical.
Inserts - 4x M4 (6mm diameter, 6mm long)
Screws (ISO4762, DIN 912):
1x M3 x 20 (it is hing or axis)
1x M4 x 20
1x M4 x 16
2x M4 x 12
I used 10mm MDF board on the end of arm because it doesn't scretch the sanded boad, but it is not critical - you can replace by plastic board with some soft surface
Material is PLA, 4 perimeters …