OSU! Mechanical Keyboard (Pro Micro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A 2% Mechanical Keyboard, designed for the game OSU!.
Splited in 2 parts for easier printing. The supported board is a Pro Micro clone. Feel free to use a foamy 2-sided tape to keep it firm.
Can be used with the cable facing both ways, you just have to arrange the pins when you build the firmware.
Files for flashing QMK can be found in my GitHub repo
If you need any help flashing or building the firmware feel free to ask.
v2:
-added a hole for reaching GND & RESET pins if you want to reflash.
-added a fillet inside so you can pry off the Pro Micro if glued to the bottom.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
50% (for the thicker click sounds)
Filament: Devil Design PLA ( or any) Light Grey
Notes:
Don't forget to account for the elephant foot effect, cause the upper top will create a lip.
Category: 3D Printing