40 GAL Hexagon tank top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Half top for a 40 GAL Hexagon tank, Complete with removable screens.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
New Half top for a 40 Gallon hexagon tank. Plexiglass required for the other side. It includes two removable screens for easy access, a tray for electronics, a center dome light to include some LED's if you like. I'm still working on the covers for the electrical tray and light compartment (top & bottom) will hopefully upload those shortly! I used M3x12 hardware and superglue to secure everything. For the screens, i cut a square larger than the printed part (about 1.5" larger all the way around) put the bottom piece of the screen panel under the screen piece, tape the screen down to the table to get it tight, then glue top on and trim the screen once the glue dries.