Pixel 8 Pro TPU Slim Case with camera bump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Slim Fit case for Pixel 8 Pro - designed for TPU
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 142
- Wydruki
- 2
- Wyświetlenia
- 1214
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a case for a pixel 8 pro. Measured dimensions from using my own pixel 8 pro.
I wanted to have a case that would also cover the rear camera bump but keep things slim so that I can still charge wirelessly.
This is designed to be printed in TPU.
It will not work with non flexible filaments!!!
Features:
- Slim back - still compatible with wireless charging
- Camera Bump cover
- Raised rim around screen
- Thicker corners
- Top Speaker Notch
- Top Mic Hole
- Bottom speakers
- USB Port
- Lanyard holes on both left and right sides
I printed mine in eSUN Thermochromic TPU. It changes colour with temperature. Yellow if >28degrees.
- 0.2 layer height
- Orient model screen side down
- Automatic supports for <45degrees
Because of the camera bump - you will need to add supports and will need to bridge across the back of the cover.
You will need to have tuned for printing in TPU!
I have many failed prints before I managed this one.
Inadequately tuned bridging or flow rate will result in the back of the case failing. See comments for pictures of my failures.
Potentially you can print vertically but because of the flexible nature of TPU it will wobble more the higher it gets. Photos attached showing vertical orientation.