Garmin MSC10 Mounting Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garmin MSC 10 Satellite Antenna mounting base. Allows use of prior 24XD holes in the wrong orientation for the MSC10.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a mounting base to allow an MSC10 Garmin Satellite antenna to mount where a prior Garmin GPS24XD was located. The three holes are similarly spaced, but this allows adjustment if the hole orientation on the boat isn't appropriate for aligning the MSC10. The lower portion has adjustability for the prior holes and then the top portion seats into it after it's attached to your MSC10.
Three circumferential holes will accept sheet metal screws or can be tapped for 8-32 bolts (preferred) to lock the assembly in place.
Ideally this should be printed with a UV resistant material. ASA is preferred. I'd suggest white for best reflection of sun energy and longevity. Polycarbonate and PETG are passable but may not have the same longevity. If you experience warping during ASA printing, apply a 15-20mm brim.