Tenlog D3Pro Linear Rail Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the Z axis rollers to linear rails.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to replace the stock Z v-rollers with linear rails. Print the mirror image for the other side. Make sure to remove the built in support after printing. There is also a Z motor mount included. I used LDO MGN12H x 450mm rails.
NOTE: This is not an upgrade for someone that does not know how to take apart and troubleshoot a printer. Your printer may differ slightly and you may need a second printer to print any custom parts that you need for your setup. I did this upgrade along with changing to Y Linear rails, Stealthburner toolheads, as well as an octopus board with Klipper.