Tenlog D3Pro Linear Rail Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the Z axis rollers to linear rails.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to replace the stock Z v-rollers with linear rails. Print the mirror image for the other side. Make sure to remove the built in support after printing. There is also a Z motor mount included. I used LDO MGN12H x 450mm rails.
NOTE: This is not an upgrade for someone that does not know how to take apart and troubleshoot a printer. Your printer may differ slightly and you may need a second printer to print any custom parts that you need for your setup. I did this upgrade along with changing to Y Linear rails, Stealthburner toolheads, as well as an octopus board with Klipper.